Intech Racing ER-12M 2.0 Lite build review

Intech Racing ER-12M 2.0 Lite build review

There is no doubt that the ER-12M 2.0 lightweight is a good looking 2wd buggy with its milled alloy chassis, carbon towers and beautifully presented shocks. I have also found that it is very similar to the Team Durango DEX210, which is probably a good thing considering these are a popular and well regarded buggy. Over a week I set out to build the ER-12 and review it as I went about building it.

Chassis and Towers

The chassis of this car is possibly the most striking I have ever seen and it went together very well, there were no issues at all and the car feels rock solid. The chassis has braces running the full length to add strength and the shock towers are made of 5mm thick carbon fibre. The chassis and towers are for me the most impressive part of the car and if you’re seeking a solid and tough platform that can handle the big impacts then this car is most definitely for you.

The arms on this car are made of a nice strong plastic and they have very little free play. Arms feature a grub screw so that you can adjust suspension droop in the same manner you would on an on-road car. Both front and rear arms are gullwing style, however there is currently no straight arm option available for the front of these cars, which would be more suited to Australian track conditions.

The space for the electronics can be tight, depending on what electronics you are fitting into your vehicle. I found that you must use a low profile servo with this vehicle or you will really struggle to fit anything in the front other than the smallest of electronics. I have used the electronics from my stadium truck in the test vehicle and I had to lightly grind a small section of the chassis brace in order to neatly fit it all in.

Another great feature of the chassis are the Intech monogrammed brass weights which can be placed in the front to improve weight distribution. I also liked the swing away carbon fibre battery straps and alloy thumb screws which not only look great but will make battery changes quick and easy.

Steering and Suspension

Steering on the ER-12 is an all alloy and carbon fibre affair with the drag link being carbon fibre and all other components being alloy. The steering is super smooth with the servo sitting inside a frame rather than on individual mounts.

Suspension is also impressive with an all alloy body, alloy cap and red anodised collar. Shocks went together pretty much the same as any other shocker I’ve built, are smooth and do not leak a drop. The pistons are slightly oversize at 12.4mm which means that you won’t be using your big bore TLR or AE pistons in this car. I found this a little frustrating as I have a plethora of 12mm pistons which would not fit the ER-12. The stock pistons are all 6 hole of varying sizes, I have chosen to use the 1.2mm up front with 30wt oil and the 1.3mm in the back with 25wt oil.


The ER-12 comes standard with a traditional style 4 gear transmission, however a 3 gear is also available. You also have a choice of ball or gear differential and I have chosen to build our ER-12 with the 4 gear transmission and with the ball differential. The ball differential went together easily and is very smooth, but make sure you fully compress the spring before assembly. I especially liked the caged thrust bearing which is carried on the inside of the outdrives, rather than outside, where they would be more susceptible to dirt ingression. The differential rings are also keyed and sit securely on the inside of the outdrives. The differential also has an all alloy T-nut which retains the main spring on the differential, rather than a plastic one. The top shaft of the transmission on the ER-12 is an interesting setup, as it is reversed with the slipper being adjusted from the rear. Overall the driveline has no slop, moves freely and is precise.

Body and wing

The body and wing is made of a quite thick and strong polycarbonate plastic, however the cut lines were not clear around the transmission and you will need to mark your own lines. This is necessary to get the body to fit around the transmission. Once you have cut a hole for the transmission the body fits well and comes with Velcro to secure it as well as a pin arrangement. I removed the pin arrangement and will just use the Velcro around the edges of the chassis to secure it.


The kit as a whole is very good but if I was to make any changes I would like to see the instructions printed a little bigger to make them clearer and also the screws placed in bags with labels telling you their size. This would speed up the build particularly if it was your first time building an Intech vehicle. I would also like Intech to provide in their instructions the spring rate of the kit springs, the number of teeth on the kit spur and the final drive ratio to make setting the car up easier.


The whole kit went together very well and has taken about 10 hours to build. Tolerances throughout the car are precise and overall the car has little to no slop in key areas such as the arms, steering and shock mounts. Components on this car are all top notch and you certainly get a lot of standard parts that others would call hop-ups and charge you extra for.

I originally intended to build and race this car in the stock buggy class but as I built it I have come to the conclusion that it would be better suited to the modified class. The solid build and lack of smaller spur options has meant that getting the ER-12 setup for modified will be far easier than stock.

In the new year I’ll be bringing you a full race and track review of the ER-12, so bring on the 2018 season! are currently offering 15% off the entire Intech Racing range and throwing in free Australian postage!

If you’d like check out the full range of Intech Racing cars and products check out or to get your hands on any of the cars in the Intech Racing range, contact the Australian distributor, Duncan at or (TEL) 0408 906 326. We also need to give a huge Thankyou to the team at Intech Racing and

Lachlan Munday at the Worlds

Here is what Lachlan had to say about his trip to the worlds in China!

2017 Worlds in China are all done, and boy do I have a lot to say! Ok, so in 2WD I qualified 63rd with some runs in the 40’s and 50’s but it was really hard to do better as I had some hacks in my group. Just crazy to see how different their racing etiquette is! In my final I led until the last lap, then hit a random bump and my car flipped  Such bad luck   Finish 62nd. In 4wd I also had some top 40 and top 50 runs. I was getting pretty tired by then and I qualified and finished 66th^-^ even though I tried my hardest. I was hoping to win that race but I got hit pretty hard and I had to race with a bent shock absorber from lap 2! It was actually pretty fun taking the jumps with a broken car and still finishing 6th with a car that wouldn’t jump or turn properly. It was pretty funny. The early starts, late nights and dark racing were really challenging, as well as having a sore stomach, but I am very happy with my results overall as I smashed my top 100 goal🔥

My highlights (not in order!!!!)

  • Holding the Australian flag at the opening ceremony. Representing Australia
  • The worlds best drivers signing my B64 body
  •  Meeting Masami Hirosaka
  • Holding the World Championship trophy with Ryan Maifield
  • Ty Tessman giving me his 4th place trophy and pass
  • Meeting new friends Clement Boda and Matthieux from France. Stéphane Boda
  • Getting interviewed by Liverc and visiting the Liverc box Aaron Waldron
  • Being on the drivers stand with Dad at a World Championship
  • Seeing the massive facility!
  • The bus ride home after the banquet with the funny Aussie team
  • “waiting for a taxi”
  •  Sitting with the ‘rockstars’ in the AE team Spencer, Kyle, Ryan, Dustin

After the racing finished, we also did some sightseeing around Xiamen City. Now , i want to talk about my expectations vs reality side of things. I thought it would be like a giant metropolis! Well it was like that, but different in many ways. I thought it would be more tall buildings and apartments- well there were, but there were also lots of small buildings and traditional buildings. Was the traffic like i expected? No. Just.Plain.No. The drivers are crazy!!! Every day we thought we would be in an accident. There are huge buses and trucks swerving, people going the wrong way down the freeway, tuk tuks, mums on scooters with babies and no helmets, three cars wide in two lanes. One day we had a supersonic bus ride- we all cheered when we arrived back at the hotel safely.

I thought crowds would be like Australia, but with more room! Nope. It was very squishy, and it was a bit push to the front-ish. Actually it WAS push to the front-ish.Very much so. You have no personal space, and people kept wanting to touch and photograph me and my sister.

Now enough about that for now. Im going to talk aboutall the wonderful experiences! (well, mostly😂) One of the coolest things In my opinion was gulangyu island, nanputuo temple and the hotel! At the botanic gardens get this, we saw 30 weddings going on!!!! We also did a bit of rock hopping 

Gulangyu island, which was a tourist island, had a great view of the ocean and some nice street food! The temple and botanical gardens was a massive day where we saw such beautiful gardens but had to climb hundreds of stairs. We also went to the hot spring in the hotel which was bliss 😁

The last day we basically spent nearly the whole time at the Airport waiting for our planes. Aaaaaaaand, now where back in Aussie Australia!!!!!!

All in all I learnt a lot and did much better that I thought I would. I also learnt that I have to do a lot more practice to be able to drive like the amazing drivers in the A-main final. I screamed so much watching them as they changed positions and raced so close. Maybe one day I can do that. I also learnt that China is an interesting and different place to visit, and that we are very lucky to have our life in Australia.

Thanks very much to everyone who has supported me in this journey to China! I read your messages but was too tired to respond. It was awesome having all of you cheering us on. I can honestly say I did my very very best.

Finally thanks to……
#HelloWorldWatergardens for helping me get to China and supporting me
#RCRS Matt Griffin for his support
ACE- Matthew Kellett and Gary Kellett
#TeamAssociated #ReedyPowered #JConcepts for the awesome products.
Mum and Dad for working on the car.
Jasmine for being a great sister.
Andrew Selvaggi for always helping out.
My Australian Team mates for their support and encouragement
The organisers for putting on such a cool event.

Intech Racing ER-12M 2.0 buggy Lite- Unboxing Review

Intech Racing, I had never heard of them either until recently, but they are a Taiwanese manufacturer making a fresh push into the Australian market with some unique and innovative ideas. Intech Racing is a relative newcomer to Australia but they have been building cars for over ten years with a focus on continuous improvement. Intech Racing manufactures a range of off-road buggies and trucks in both 10th and 8th scale, with either electric or nitro power trains.

Intech Racing has kindly provided Aussie RC News with an ER-12M 2.0 Lite 2wd buggy to build and review. Prior to sending a test vehicle, Intech Racing contacted me to discuss which vehicle we would like to test first. After looking at their range of smart looking vehicles the ER-12M 2.0 Lite 2wd buggy stood out to me as a vehicle which would be well suited to racing and being 2wd we could put it to the test in the 2wd stock class, racing against the established brands.

The ER-12 2.0M is a rear wheel drive buggy, with a mid-mounted motor design and a narrow aluminium chassis. This type of design is now the most common in Australia, with rear mounted motor platforms now a rarity. Continue reading Intech Racing ER-12M 2.0 buggy Lite- Unboxing Review