Yes the latest episode is up, catch it here
Yes the latest episode is up, catch it here
I was ecstatic when RC4WD contacted me to review their new hard body for the Trail Finder 2 chassis late last year. However try as I may I couldn’t wheedle out of them what it was until it arrived at my door. As we know now, it was a Toyota 4Runner from 1985 that came out of that box, and today we can now reveal the finished product in all it’s 80’s glory!
My first impressions of the kit when I opened the box was of amazement at the level of detail that it included from big details like opening doors, tailgate and bonnet, down to stickers for the dashboard, instruction placard for 4wd and even the tiny indicator stalks on the steering column. At this time my excitement moved a little into the arena of panic. Whilst I have built an worked on a lot of RC cars from Kits to RTR’s, this was my first detailed hard body from any firm, let alone one with a reputation for amazing detail like Rc4wd, and I really didn’t want to make a mess of it. But then how different could it be to the model plane and tank kits I used to make not so many years ago…. right?
So working with a combination of tools for my radio control racing pit bag, and my modelling toolbox I set off on the build. Naturally the first step was reading the instructions and then I put it all away for the next most important step, research. Below are the images that I used for inspiration.
No, i’m not mad (ok, maybe a little) but a key part of any project like this is knowing what the vehicles looked like in real life, and knowing what colours you want to paint it, what markings (in this case stickers) you need to use, and details like bumper colours etc etc. With that done and deciding to go with a bright red colour scheme I purchased a can or red paint, some black and browns for the interior, and the build could begin in earnest.
Tip 1: know your size, 1 pressure pack of tamiya paint may be fine for a small tank in 1:72 or 1:48, but not a big 1:10 4wd! In the end I used 3 cans of paint.
Tip 2: Don’t spray on windy days, I suspect I lost almost a whole can battling the wind in trying to get the bodywork painted. Don’t Rush, take your time.
Now I mentioned research and planning earlier, and planning is an important part of this built. If you just put the kit together as stated and tried to paint it, you would be left in a nightmare of close together parts that should be different colours. Even step one can’t really be completed until later in the build as you need to paint the taillights in 2 different colours, and the body needs to be painted before you can attach them. So plan ahead, and work out what gets put together before and after painting and you will be far happier with the result.
One thing I loved about the instructions is that they presume you know what you are doing. Parts are rarely needed to be labelled by their numbers, and the screws are also labelled clearly as to size and number needed for any given step. Not only that but each screw is in it’s own labelled bag, often with a spare in each size which I did need.
Tip 3: The screws that hold in the tail lights need 2 different screwdrivers, get it right or you strip the small M1.6 philips head screws. Spares in the kit to the rescue!
So whilst a first glance at the kit may be panic inducing, the steps move through logically and smoothly. All parts were good fits, especially the metal parts. I had to remove some moulding flash from a few parts, but it probably doesn’t show up when you look at it on a larger scale. I probably spent more time worrying about what colours what part would be than any concerns with the build itself.
I loved that all the lights have provision for LED lights to be fitted, and I thought the magnet built into the bonnet and frame to keep the bonnet closed (and a similar arrangement with the passenger doors) were very clever additions to this detailed kit. Similarly the great looking, but actually made of rubber so they don’t break off so easily rear view mirrors were also a clever inclusion.
Painting the large body proved to be my biggest headache with a lot more real estate to cover with paint than I am used to. As a result of rushing (yes, again take your time!) and inexperience I can see a slight variation in the colouring on a couple of my panels. Whilst it isn’t particularly noticeable it has given me a few ideas to weather the model from an as new look, to a work and repaired look of a well used vehicle, but that will be a topic of a different article.
Tip 4: Paint all of your exterior panels at the same time, and shake the c^@& out of the cans before you start spraying.
Tip 5: Don’t skimp on masking tape, the Tamiya tape is worth it over normal blue masking tape, and take it off as soon as you can, even between coats.
Tip 6: if you need to remove masking tape residue without damaging the paint, I found WD40 does wonder after trying about 20 other products.
Bits I didn’t like about the kit, well they are few and far between. The back of the headrests and interior of the canopy on the tray could have had a little more detail, but considering the detail there is to be found on this kit, it really is nit picking.
The Final Result
Well I would be telling porky pies of I said I was 100% happy with the result, but that is entirely down to small mistakes made on my part. As far is the kit is concerned, it is magnificent. It more than justifies it’s asking price and is rich in detail and features. Be it for a hard working crawler or shelf queen, it has certainly entered the annuls of the Crawler Hall of Fame as an iconic vehicle recreated with perfect clarity.
I have learnt a lot from the build, and enjoyed it more than a little, in fact I found myself contemplating what I could or would do differently, or improve upon, next time. I wonder what else RC4WD have up their sleeve. In the meantime, Brady, didn’t you have a Gelande 2 that needed some repairs ……
Want to get your hands on this 80’s goodness, then hit up RC4WD at